产品介绍
NEW HIPOTRONICS X-WAVE PRIMARY CABLE FAULT LOCATOR
Hipotronics X-WAVE is the most advanced, safest, and powerful cable fault locating tool on the market for sectionalizing your 500 V to 15 kV Class Power CableURD loop feed installations!
Four Simple Cable Testing Steps:
1.) Hipot Test - use this mode to indentify if a cable fault is present
2.) Low Voltage TDR - use this mode to determine overall length of cable
3.) High Voltage TDR - use this mode to determine exact distance to cable fault
4.) Cycle Mode (Thumper) - use this mode to repeatedly apply hipot voltage to create audible thump or crack at the fault which can help to precisly locate fault
• Automatic identification of key cable parameters (cable length and distance to fault)
• Quick location of faults
• Accessible memory locations for internal trace storage
• Large LCD display designed with a trans-reflective film for use in direct sunlight
• Automatic setup of sampling rate, gain and pulse width
• Intuitive, step-by-step Instructions ensures ease of operation
• Large, easy-to-use push buttons can be used with gloves on!
• Proof Tester 500V to 10kV DC variable output
Benefits
• Safety – Isolated return & all front panel parts securely grounded for safe operation of the unit
• Multi-Purpose Device - has ability to pre-locate, locate and diagnose cable faults
• Easy to Use - device walks user through test procedure; in 5 easy steps you’ve located the fault
• Serial Port – allows for waveform download and evaluation of test results
• Reduce Outage Time - by quickly locating cable faults you reduce outage time and get power back to your customers sooner
• Reduce Cable Damage - using a TDR reduces thumping and therefore damage to the cable
The X-Wave is generally used by:
- Electrical Utilities - Cable Testing Companies
- Petrochemical - Mining Facilities
- Facility Maintenance - Electrical Contractors
Hipotronics X-Wave 一次电缆故障定位器，适用于 500V 至 15 kV 级电力电缆
新的 HIPOTRONICS X-WAVE 主要电缆故障定位器
Hipotronics X-WAVE 是市场上最先进、最安全、功能最强大的电缆故障定位工具，用于对 500 V 至 15 kV 级电力电缆URD 回路馈电装置进行分段！
四个简单的电缆测试步骤：
1.) Hipot Test - 使用此模式来确定是否存在电缆故障
2.) 低电压 TDR - 使用此模式来确定电缆的总长度
3.) 高压 TDR - 使用此模式确定到电缆故障的准确距离
4.) 循环模式 (Thumper) - 使用此模式重复施加耐压电压以在故障处产生可听见的砰砰声或裂纹，这有助于精确定位故障
• 自动识别关键电缆参数（电缆长度和故障距离）
• 快速定位故障
• 用于内部跟踪存储的可访问内存位置
• 带有透反射膜的大型 LCD 显示屏，可在阳光直射下使用
• 自动设置采样率、增益和脉冲宽度
• 直观的分步说明确保易于操作
• 大而易于使用的按钮可以戴上手套使用！
• 验证测试仪 500V 至 10kV 直流可变输出
好处
• 安全 – 隔离回路和所有前面板部件安全接地以确保设备的安全操作
• 多用途设备 - 能够预先定位、定位和诊断电缆故障
• 易于使用 - 设备引导用户完成测试程序；只需 5 个简单步骤即可找到故障
• 串行端口——允许波形下载和测试结果评估
• 减少停电时间——通过快速定位电缆故障，您可以缩短停电时间并更快地为客户恢复供电
• 减少电缆损坏 - 使用 TDR 可减少重击，从而减少对电缆的损坏
X-Wave 通常用于：
- 电力公用事业 - 电缆测试公司
- 石化 - 采矿设施
- 设施维护 - 电气承包商
