Products
CHK-INS-MF insertable check standard SMA(m-F)
-
The TA430 CHK-INS-MF is a check standard for use with an insertable DUT, with a male and a female port that can be used to validate the accuracy of a network analysis test setup and its calibration before and during or after measurements are made.
-
Akin to the Beatty line, each check standard is a short length of mismatched line (75 mm of 25 Ω) with a predictable, smooth and stable mismatch and transmission characteristic that spans the frequency range of the PicoVNA 106.
-
These devices validate system measurement accuracy in the presence of high and varying mismatch and thus present a demanding validation on which to base confidence in a setup.
Pico TA430 CHK-INS-MF 可插入检查标准 SMA (m-f)
CHK-INS-MF 插入式检查标准 SMA(m-F)
TA430 CHK-INS-MF 是与可插入 DUT 一起使用的检查标准，带有公端口和母端口，可用于在进行测量之前、之中或之后验证网络分析测试设置及其校准的准确性 .
类似于 Beatty 线，每个检查标准都是一段较短的失配线（75 毫米，25 Ω），具有可预测、平滑和稳定的失配和传输特性，跨越 PicoVNA 106 的频率范围。
这些设备在存在高度和变化的失配的情况下验证系统测量精度，因此提出了苛刻的验证，以建立对设置的信心。
