Enerco KT-30 Rail Gap Adjuster
Enerco KT-30是一款液压操作手泵式轨道间隙调节器，能够以高达300千牛或30吨的力推动或拉动轨道端部。
它在内置滚轮上承载自身重量，便于沿轨道运输，并且因为它是完全独立的，所以不需要笨重的动力包。
该装置夹住轨头，留出拆卸鱼尾板和更换绝缘端柱的通道，同时仍然保持钢轨中存在的任何张力或压力。
轨道间隙调节器使得更换故障端柱成为可能，而无需等待轨道冷却。
这可以在不到半小时内完成，减少了火车延误并在此过程中节省了大量资金。
用于:
在不拆除鱼尾板的情况下更换绝缘接头端柱。
调整接合轨道、道岔和交叉上的间隙，以纠正蠕动。
使用我们的Master 35冲击扳手或其他合适的设备更换破损和磨损的鱼尾板。
利用最近的鱼尾板接头调节通气开关。
KT-30在一次操作中的推/拉距离可达100毫米（4英寸），几次操作后可达250毫米（10英寸）。
规范
型号KT-30
最大力（千牛）300
长度（毫米）1500
宽度750毫米
高度（毫米）530
冲程（毫米）100
重量（公斤）100
Products
The Enerco KT-30 is a hydraulically operated hand pumped Rail Gap Adjuster, capable of either pushing or pulling rail ends with a force of up to 300 Kn or 30 tonnes.
It carries its own weight on built-in rollers, for easy transit along the rail and because it is totally self contained, bulky powerpacks are not required.
The unit grips the rail head, leaving access to remove fishplates and replace insulating end posts, while still holding any tension or compression present in the rail.
The Rail Gap Adjuster makes it possible to replace a failed end post without the need to wait for the rail to cool down.
This can be done in less than half an hour, reducing train delays and saving significant sums of money in the process.
Used For:
Replacing Insulated Joint End Posts without removing the fish plates.
Adjusting the gap on jointed track, Switches and Crossings to correct for creep movement.
Replacing broken and worn fishplates using our Master 35® Impact Wrench or other suitable device.
Adjusting breather switches utilising the nearest fish plate - joint.
The KT-30 can push/pull up to 100mm (4") in a single operation and up to 250mm (10") with several passes.
Specifications
Model No. KT-30
Max Force (kN) 300
Length (mm) 1500
Width (mm) 750
Height (mm) 530
Stroke (mm) 100
Weight (kg) 100
