Products
The Quick-Check Transformer and Capacitor Testers provide quick and easy tests for opens and shorts on power distribution systems. They operate with a single push-button and provide clear indications of open circuits, short circuits and confirmation that the test results are OK.
The Quick-Check performs all the same transformer tests as the TILT II, and also tests capacitors and capacitor banks. The Quick-Check uses the same single push-button operation as the TILT II and automatically distinguishes between transformers and capacitors. The Quick-Check tests capacitors individually or connected in capacitor banks. The Capacitor O.K. indication confirms that the capacitor is not internally shorted or open.
The Quick-Check is available with either manual self-test tabs on the side of the unit or automatic self-test.The units will automatically perform a complete self-test of the battery, lights, beeper and all electronics every time the TEST button is pushed. A magnet is also available for hands-free operation.
BENEFITS
-
Tests transformers and capacitors for major defects before energizing
-
Tests overhead, pad-mount and other distribution transformers as well as capacitors and capacitor banks
-
Teststhe primary and secondary sides of de-energized transformers without disconnecting
-
Prevents line workers from installing a fuse on a shorted transformer or capacitor
-
Quickly verifies the secondary connections are not shorted
FEATURES
-
Large copper alligator clips with heavy duty boots
-
Heavy duty rubber insulated coiled test leads
-
Compact, lightweight and easy-to-use
-
Powered by a 9V lithium or alkaline battery
-
Super bright LED indicators
-
Audible alarm confirms successful test
-
Built-in self-test feature available
-
Continuous testing while button is pressed
HD Electric QC-AST-M 快速检查变压器和电容器测试仪，带自动自检和磁铁
Quick-Check 变压器和电容器测试仪为配电系统的开路和短路提供快速简便的测试。它们通过一个按钮进行操作，并提供明确的开路、短路指示并确认测试结果正常。
Quick-Check 执行与 TILT II 相同的所有变压器测试，还测试电容器和电容器组。 Quick-Check 使用与 TILT II 相同的单按钮操作，并自动区分变压器和电容器。 Quick-Check 测试单独或连接在电容器组中的电容器。电容器OK指示确认电容器没有内部短路或开路。
快速检查可通过设备侧面的手动自检选项卡或自动自检获得。 每次按下 TEST 按钮时，设备将自动对电池、灯、蜂鸣器和所有电子设备进行完整的自检被推。磁铁也可用于免提操作。
好处
在通电前测试变压器和电容器的主要缺陷
测试架空、底座安装和其他配电变压器以及电容器和电容器组
在不断开连接的情况下测试断电变压器的初级和次级侧
防止线路工人在短路的变压器或电容器上安装保险丝
快速验证辅助连接没有短路
特征
带重型靴子的大型铜鳄鱼夹
重型橡胶绝缘盘绕测试导线
紧凑、轻便且易于使用
由 9V 锂电池或碱性电池供电
超高亮 LED 指示灯
声音警报确认测试成功
提供内置自检功能
按下按钮时连续测试
