Products
The VP-1 can also be used as a proximity voltage detector for voltages exceeding 21kVAC when using appropriately rated electrical insulating gloves. The VP-1 gives a flashing red light and beeping indication when voltage is detected. The VP-1 should be tested before and after use with the accessory PT-VP Voltage Probe Tester
FEATURES & BENEFITS
-
Tests exposed metallic surfaces and conductors for the presence of secondary voltage
-
Tests unshielded primary voltage cable insulation
-
Tests primary voltage joint and termination test points for the presence of voltage
-
Simple indication of voltage – flashing red light and beeper
-
Compact, lightweight and easy-to-use
-
No on/off switch – always on
-
Super bright LED indicator
-
Low battery indicator - when flashing light is no longer visible
-
Powered by 2 AA field replaceable lithium or alkaline batteries
HD Electric VP-1/K01 直接接触电压探头套件
VP-1 还可以用作接近电压检测器，当使用适当额定的电绝缘手套时，电压超过 21kVAC。 当检测到电压时，VP-1 会发出闪烁的红灯和蜂鸣声指示。 VP-1 应使用附件 PT-VP 电压探针测试仪在使用前后进行测试
特点与优势
测试暴露的金属表面和导体是否存在二次电压
测试未屏蔽的初级电压电缆绝缘
测试初级电压接头和终端测试点是否存在电压
电压的简单指示——闪烁的红灯和蜂鸣器
紧凑、轻便且易于使用
无开/关开关 – 始终开启
超高亮LED指示灯
低电量指示灯 - 当闪烁的灯不再可见时
由 2 节 AA 现场可更换锂或碱性电池供电
