Products
Accushim HA-2 Reverse Dial Indicator Shaft Alignment Hardware System
Features
-
Calculates alignment corrections down to 0.0001 of an inch
-
Combines the most versatile, sturdy stainless steel alignment hardware available with a user friendly alignment computer (ADD-ON), taking the once complicated task of shaft alignment and simplifying it by providing accurate, exact recom-mended foot movements for the machine being aligned.
-
Users can perform both "Rim/Face" method (shown) as well as "Reverse Indicator" method with hardware included. System accommodates shafts from 1/2" to 9-1/2" and includes all the necessary hardware, clamps, chains, etc. in a sturdy aluminum carrying case
-
Drastically reduces vibration and energy consumption
-
Calculates vertical and horizontal movements necessary to align shafts correctly
-
Increases productivity and effic-iency of plant equipment
-
Maintenance scheduling is easy with fewer emergency repairs
-
Fully jeweled, balanced face dial indicators
-
All hardware is durable and corrosion resistant stainless steel
-
Rigid hardware reduces sag errors over wide couplings
-
Bearings, seals, gears, and shafts last longer
-
Also performs Rim/Face method
Accushim HA-2 倒转指示轴对准硬件系统
Accushim HA-2 倒转指示轴对准硬件系统
特征
计算精确到 0.0001 英寸的对齐修正
将可用的最通用、最坚固的不锈钢对中硬件与用户友好的对中计算机 (ADD-ON) 相结合，通过为要对中的机器提供准确、准确的推荐脚部运动来处理曾经复杂的轴对中任务并简化它。
用户可以执行“Rim/Face”方法（如图所示） 以及包含硬件的“Reverse Indicator”方法。系统可容纳 1/2" 至 9-1/2" 的轴，并在坚固的铝制手提箱中包含所有必要的硬件、夹子、链条等
大幅降低振动和能耗
计算正确对齐轴所需的垂直和水平移动
提高工厂设备的生产力和效率
维修计划很容易，紧急维修次数减少
完全镶嵌宝石的平衡面表盘指示器
所有硬件均为耐用且耐腐蚀的不锈钢
刚性硬件可减少宽联轴器上的下垂误差
轴承、密封件、齿轮和轴的使用寿命更长
还执行 Rim/Face 方法
