Products
Swing Frame for 19" Mounting, Fits Encl 72 x 30 - Steel/Blk
-
Fits Enclosure 72" x 30"
-
Finished in black
-
Formed from 10 gauge steel, frames are drilled and tapped to EIA requirements for mounting standard 19" rack accessories
-
Designed for installation in 72" and 90" high enclosures. The swing frame pivots on 0.5" pins within the enclosure for easy access to the rear of rack mounted equipment
-
The frame positions at any depth within the enclosure and is fastened in the closed position with quarter turn fasteners
-
Swing frames may be mounted in 30" and 36" wide enclosures, or in 60" and 72" wide enclosures with an optional center panel support
-
One or two frames may be mounted in 30" and 36" wide enclosures with dual access, and 1,2,3 or 4 frames may be mounted in 60" and 72" wide dual access enclosures
哈蒙特Hammond 1418SFX 19" 外摆式框架，72" x 30" 用于 19" 安装的摆动框架，适合 Encl 72 x 30 - 钢/黑色
适合外壳 72" x 30"
黑色完成
框架由 10 号钢制成，根据 EIA 要求进行钻孔和攻丝，以安装标准 19" 机架附件
设计用于安装在 72" 和 90" 高的机柜中。 摆动框架在外壳内的 0.5" 销上枢转，以便于接触机架安装设备的后部
框架位于机柜内的任何深度，并使用四分之一圈紧固件固定在关闭位置
摆动架可以安装在 30" 和 36" 宽的外壳中，或者安装在 60" 和 72" 宽的外壳中，并带有可选的中央面板支撑
一个或两个框架可以安装在 30" 和 36" 宽的双通道外壳中，1、2、3 或 4 个框架可以安装在 60" 和 72" 宽的双通道外壳中
