Maus F/796 Motorised Tube Cutter
电动切管机，用于从管板切割管子的管子突起。适用于外径从1/2英寸到1.1/2英寸（从12.70毫米到38.10毫米）的管子
用于制造新管板时，它解决了完全去除高达70毫米（2.756英寸）的多余管突起的问题。
该工具设计用于传统便携式铣刀之前，大大减少了加工时间和工具消耗
F/796型号是根据要切割的管子的外径和厚度选择的。
根据具体要求单独提供的3套衬套/导向器允许工具适应不同的壁厚。
通过保持相同的工具，只更换校准的衬套/导向装置，您可以在外径相同的不同厚度的管子上工作。
将F/796插入管中，直到其停在管板上；停止点由可调止推环确定。
旋转刀片逐渐在管内壁上推动，直到切割完成。
该工具使用便携式电动或气动马达驱动。
高速钢刀片涂有氮化钛铝涂层。
Products
Motorised tube cutter for cutting the tube protrusion of the tube from the tube sheet. Suitable for tube OD from 1/2" to 1.1/2" ( from 12.70 to 38.10 mm )
-
Used in the manufacturing of new tube sheets, it solves the problem of the total removal of excess tube protrusions, up to 70 mm (2.756”).
-
This tool is designed to be used before the traditional portable milling cutters, significantly reducing process times and tool consumption
The F/796 model is chosen according to the outer diameter and to the thickness of the tube to be cut.
-
The set of 3 bushes/pilot, supplied separately according to the specific requirement, allows the tool to adapt to different wall thicknesses.
-
By keeping the same tool and replacing only the calibrated SET of bushes/ pilot will allows you to work on tubes of different thicknesses with the same external diameter.
-
F/796 is inserted into the tube until it stops on the tube sheet; the stopping point is defined by the adjustable thrust collar.
-
A rotating blade is gradually pushed on the tube internal wall until cutting is completed.
-
The tool is driven using a portable electric or pneumatic motor.
-
The HSS blades are coated with Titanium Aluminium Nitride - TiAIN.
