Products
Version B: With the Multi-Sensor all-around microphone, in an extremely compact design, Fisher has achieved higher performance, improved audio clarity, improved sensor electronics, and better sensitivity to leaks with less background noise . The MULTI-SENSOR is the one sensor that does it all.. Kit also includes:
1. Hydrophonic Cylinder Probe
This probe is a direct contact probe designed to make direct connection to the pipe, or any portion of the pipe that is accessible. Used in any combination of Sound Rods with the T-Handle, pipes can be accessed
to distances up to nearly 6 feet away. Another feature of the Cylinder Probe is the ability to listen to pipe noise in pipes that are buried in turf, or soft surfaces. Accurate pipe location is essential for the placement of the Ground Rods as close to the pipe as possible. On top of the Cylinder Probe is a three position toggle switch for mute, listen, and momentary listen. As with all mute controls, learn to use them wisely. When tightening the sounds rods to the Hydrophonic Probe, secure the connector with a wrench as to not let it twist. Twisting of that connector could damage wiring on the inside of the probe.
2. Sound Rods
Two different sizes are included with the XLT-30. Rods give the user various lengths for direct or indirect contact to pipes.
3. T-Handle
This handle is used primarily with the Cylinder Probe and the sound rods.
4. Headphones
These headphones are designed to deliver the clearest sound with the least distortion. The Volume knob can be used to adjust the audio level. Unplugging the headphones will turn off the XLT-30. When the XLT-30 is turned off, any modifications to the Volume, Notch, and Filter will return to the factory presets.
5. Probe Cable
This cable attaches at the back of the Control Housing to any of the various probes. Make sure the jack is fully inserted and the lock nut is hand tightened.
6. Carrying Strap/Housing Mounting Bracket
The attachment system for the XLT-30 consists of a plastic mounting bracket that slides from the bottom of the control housing up to the bezel around the faceplate. There are two slots for attaching an adjustable strap that hangs around the neck of the user.
Fisher XLT-30B 声学液体检漏仪
版本 B：借助多传感器全能麦克风，采用极其紧凑的设计，Fisher 实现了更高的性能、更高的音频清晰度、改进的传感器电子设备以及更好的泄漏灵敏度和更少的背景噪音。 MULTI-SENSOR 是一款功能齐全的传感器。套件还包括：
1. 水声圆柱探头
该探头是一种直接接触探头，旨在直接连接到管道或管道的任何可触及部分。用于音棒与 T 型手柄的任意组合，可以接触管道
到近 6 英尺的距离。 Cylinder Probe 的另一个特点是能够聆听埋在草皮或柔软表面中的管道中的管道噪音。准确的管道位置对于将接地棒尽可能靠近管道放置至关重要。 Cylinder Probe 的顶部是一个三位拨动开关，用于静音、聆听和瞬时聆听。与所有静音控件一样，请学会明智地使用它们。将音棒拧紧到水声探头时，请用扳手固定连接器，以免其扭曲。扭曲该连接器可能会损坏探头内部的接线。
2. 音棒
XLT-30 包含两种不同的尺寸。杆为用户提供各种长度以直接或间接接触管道。
3. T 型手柄
该手柄主要用于圆柱探头和音棒。
4. 耳机
这些耳机旨在以最少的失真提供最清晰的声音。音量旋钮可用于调节音频电平。拔下耳机将关闭 XLT-30。当 XLT-30 关闭时，对音量、陷波和滤波器的任何修改都将恢复为出厂预设。
5. 探头电缆
该电缆在控制外壳的背面连接到各种探头中的任何一个。确保千斤顶完全插入并用手拧紧锁紧螺母。
6. 背带/外壳安装支架
XLT-30 的连接系统由一个塑料安装支架组成，该支架从控制外壳底部向上滑动到面板周围的挡板。有两个插槽用于连接挂在用户脖子上的可调节肩带。
