Products
TAG Voltage Detectors quickly test for the presence of voltage to help ensure the safety of line personnel. When in contact with an energized conductor, TAG Voltage Detectors emit an audible and visual alarm to clearly warn the user if the conductor is energized. Before and after each use, a built-in All-Check™ Self-Test System is used to verify that the instrument is operating properly. Units are designed for overhead and underground applications, with optional underground bushing probes.
The TAG-200/MR dual range voltage detector is similar to the TAG-200, except it is a dual range direct contact voltage detector having two distinct ranges. It will indicate the presence of voltage and will show which range setting by the number of LED's activated.
The TAG-200/MR has two red LED’s and an audible alarm to indicate the presence of voltage.
-
If one LED is activated during contact with a conductor,the voltage present is within the lower voltage range.
-
If two LED’s are activated, the voltage present is within the higher voltage range.
If theTAG-200 orTAG-200/MR are used in situations where the voltage is more than three times higher than the range listed on the product label, it will act as a proximity detector before direct contact is made.
FEATURES
-
Direct contact voltage detectors give audible and visual indication of the presence of voltage
-
Designed to physically contact conductor under test
-
Audible and visual alarms
-
No on/off or range selector switches- always on
-
Designed for rugged field use
-
Compact, lightweight and easy to use
-
All-Check self testing system
-
Water resistant/gasketed housing
-
Built-in universal spline for hotstick attachment
-
9-volt lithium or alkaline battery operated
-
Carrying case included
-
Optional bushing probes for use in underground applications
HD Electric T200MR-0412 双量程电压检测器 (4kV) 和 (12kV)
TAG 电压检测器可快速测试是否存在电压，以帮助确保线路人员的安全。当与带电导体接触时，TAG 电压检测器会发出声音和视觉警报，以在导体带电时清楚地警告用户。每次使用前后，都使用内置的 All-Check™ 自检系统来验证仪器是否正常运行。装置专为架空和地下应用而设计，带有可选的地下套管探头。
TAG-200/MR 双量程电压检测器与 TAG-200 类似，不同之处在于它是具有两个不同量程的双量程直接接触电压检测器。它将指示电压的存在，并通过激活的 LED 数量显示哪个范围设置。
TAG-200/MR 有两个红色 LED 和一个声音警报，用于指示电压的存在。
如果在与导体接触期间激活一个 LED，则当前电压在较低电压范围内。
如果两个 LED 被激活，则当前电压在较高的电压范围内。
如果 TAG-200 或 TAG-200/MR 用于电压比产品标签上列出的范围高出三倍以上的情况，它将在直接接触之前充当接近检测器。
特征
直接接触电压检测器提供电压存在的听觉和视觉指示
设计用于物理接触被测导体
声音和视觉警报
没有开/关或范围选择器开关 - 始终打开
专为恶劣的现场使用而设计
紧凑、轻便且易于使用
All-Check自检系统
防水/密封外壳
用于热棒连接的内置通用样条
9 伏锂电池或碱性电池供电
包括手提箱
用于地下应用的可选套管探头
